Advertorial

6 Reasons This £29.99 24-in-1 Ratcheting Screwdriver Set Belongs in Your Toolbox

Your tool drawer should not be a puzzle.

You are reaching into a tight spot with one hand braced, trying to turn a stubborn screw. Every quarter turn means lifting the screwdriver, re-gripping and starting again.

Then you dig through the drawer for the right bit — and find three of the wrong ones.

What if one compact set gave you a ratcheting handle, 24 bits and a case that keeps them all in place?

24-in-1 Ratcheting Screwdriver Set

Meet the 24-in-1 Ratcheting Screwdriver Set: a compact T-handle ratchet with an extension shaft, 24 magnetic chrome-vanadium bits in 5 head types, and a storage case. Here are six reasons DIYers are adding it to their toolboxes.

🎁 This week: FREE Magnetizer worth £12.99 with every set — plus a 60-day money-back guarantee.

1. 24 Bits, 5 Head Types, One Compact Case

Compact storage case

Instead of a drawer full of loose bits, everything lives in one compact case that fits a drawer, a glovebox or a toolbox.

  • Phillips: PH1, PH2, PH3
  • Pozidriv: PZ2
  • Flat: SL4, SL5, SL6
  • Torx: T5, T6, T8, T10, T15, T20, T25, T27
  • Hex: H1.5, H2, H2.5, H3, H4, H5, H6, H6.35, H8
Flat-pack furniture, appliances, bikes and electronics — one set covers them.

2. A Ratchet That Works in Tight Spaces

Ratchet mechanism

Keep turning with short back-and-forth strokes instead of lifting and re-gripping after every turn. Flip the switch to change between tightening and loosening.

  • Forward and reverse switch
  • Short strokes for cramped spots
  • Less wrist twisting on stubborn screws

3. T-Handle and Extension Shaft: Grip and Reach

T-handle and extension shaft

The T-handle gives you a strong two-handed grip for more turning force. Add the extension shaft when the screw sits deep inside a cabinet, appliance or bike frame.

  • T-handle for extra turning force
  • Extension shaft for deep or recessed screws
  • Switch setup in seconds

4. Magnetic Bits That Hold Your Screws

Magnetic bit holding a screw

The bits snap into place magnetically and hold the screw on the tip, so you can start it one-handed — even overhead or in hard-to-reach places.

  • Bit stays in the handle while you work
  • Holds screws in hard-to-reach places
  • Fewer dropped bits and screws
Bonus: the FREE Magnetizer re-magnetizes your bits — or any screwdriver — in seconds.

5. Colour-Ringed Bits and a Storage Case Keep You Organised

Colour-ringed bits in the case

Each bit has a colour ring so you can pick the right one at a glance, and every bit has its own slot in the case.

  • Colour rings for quick identification
  • Every bit has its own place
  • Everything together for home, garage and car

6. Tough Chrome-Vanadium Steel Bits

Set next to a toolbox

The bits are made from hardened chrome-vanadium steel for strength and long life.

Bits 24 magnetic bits, chrome-vanadium steel
Head types 5: Phillips, Pozidriv, flat, Torx, hex
Ratchet Forward & reverse switch
Handle T-handle with extension shaft
Case Compact storage case
Bonus FREE Magnetizer & Demagnetizer (worth £12.99)
Made for DIY, garage, home and maintenance work.
🔧24 bits in one set
🎁FREE Magnetizer
🧲Magnetic bits
✅60-day money back

How to use (3 simple steps)

1
Pick your bit

Choose the head type using the colour ring and take it from the case.

2
Attach to the handle

Push the bit into the magnetic holder. Add the extension shaft if you need more reach.

3
Ratchet

Set the direction switch and work with short back-and-forth turns.

How to use

Use the correct bit for each screw and apply steady pressure.

Why choose this ratcheting set?

Feature This ratcheting set Standard screwdriver
Ratchets in tight spaces ✔ Short back-and-forth turns ✘ Re-grip each turn
Bits included ✔ 24 bits, 5 head types Usually one
Holds bit & screw ✔ Magnetic Varies
Forward / reverse switch ✔ Yes ✘ No
Colour-ringed bits ✔ Yes —
Carry case ✔ Compact case —
Free Magnetizer ✔ Included —

Common questions

What is included?

A T-handle ratchet screwdriver with extension shaft, 24 magnetic bits, a storage case — and a FREE Magnetizer & Demagnetizer worth £12.99.

Which bit sizes are included?

Phillips PH1, PH2, PH3 · Pozidriv PZ2 · Flat SL4, SL5, SL6 · Torx T5, T6, T8, T10, T15, T20, T25, T27 · Hex H1.5, H2, H2.5, H3, H4, H5, H6, H6.35, H8.

Is the Magnetizer really free?

Yes. Every set comes with a FREE Magnetizer & Demagnetizer, normally £12.99. No code needed.

What if I don't like it?

You're covered by our 60-day money-back guarantee. Contact us within 60 days for a full refund.

How long does delivery take?

UK delivery usually takes 6–9 days from the day you order.

Will it work in tight spaces?

Yes. The ratchet works with short back-and-forth turns, so it suits cramped spots where you can't turn a full circle.

Upgrade Your Toolbox — Click Below!

24-in-1 Ratcheting Screwdriver Set

Today's offer

24-in-1 Ratcheting Screwdriver Set

🎁 Includes a FREE Magnetizer worth £12.99

£29.99
GET MINE + FREE MAGNETIZER
🔒 Secure checkout✅ 60-day money back📦 24 bits + case

©Starlock Blade 2026 All rights reserved.